

Using both hands, put one piece of paper in the manual feed slot until the front edge of the paper touches the paper feed roller. Make sure there isn’t any remaining paper jammed under the print head, but be careful not to get ink on your clothes. Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use. You should first remove the jammed paper from the front, then from the back, and then check the inside of the printer. Now the Control Center gives the message 'Check the I/F connection etc. If the paper is jammed on both sides, follow the previous instructions step by step. My Brother Control Center 4 is not connecting to my Brother MFC-7860DW printer/scanner. Plug the printer back into the outlet and check if it’s working properly now. For the location of a Brother authorized service center, call 1-877-BROTHER (1-87) or visit us on-line at Service Center Locations (Canada only) For the location of a Brother authorized service center, call 1-877-BROTHER.Dieses Handbuch fällt unter die Kategorie Drucker und wurde von 1 Personen mit einem Durchschnitt von 7.4 bewertet. Take a look at the inside of the printer for any leftover paper. Sehen Sie sich hier kostenlos das Handbuch für Brother MFC-7860DW an.Close the cover and make sure you’ve done it correctly.Open the back cover of your Brother printer.

If the paper gets stuck at the back, here’s what to do: or try Cleaning the paper feed rollers in the cartridge access area. 4.click on left arrow.Then it will display printer in use.

Remove the paper tray from the printer.If the paper is stuck at the front, you should follow these steps: If you’re checking the inside of the printer and touching the print head, you should wait for it to cool down first. Before you start troubleshooting, unplug the printer from the power source.
